A Full Line of Dedicated CNC Knee Mills - Fully Customizable and Configurable
MPG Dry Run Mode - unique feature with LNC controllers - lets you step, or wind, through programs with actual motion on the machine with the Hand Wheel then switch to automatic at any time on the fly.
|
MODEL |
CNCM3 |
CNCM4 |
CNCM5 |
CNCM6 | ||
|
Work Table |
Dimensions |
Inch |
10 x 50 |
10 x 52 |
11 x 54 |
12 x 54 |
|
Max Long. Travel - X |
Inch |
27.56 |
28.35 |
29.13 |
29.13 | |
|
Max Cross Travel - Y |
Inch |
13.39 |
14.96 |
15.75 |
16.54 | |
|
Max Knee Travel |
Inch |
14.96 |
15.75 |
17.52 |
17.72 | |
|
Slot No. x Width |
Inch |
3 x 5/8 | ||||
|
Screw Pitch |
Inch/Rev |
0.4 |
0.4 |
0.4 | ||
|
Max Work Load |
Lb |
660 |
880 |
1,100 | ||
|
X/Y Motor |
Continuous Power |
Hp |
1.15 (850W) | |||
|
Continuous Torque |
In-Lb |
48 | ||||
|
Feed Rates |
Cutting Feed Rate |
IPM |
0 - 78 | |||
|
Rapid Feed Rate |
IPM |
0 - 295 | ||||
|
Z Motor |
Continuous Power |
Hp |
1.15 | |||
|
Continuous Torque |
In-Lb |
48 | ||||
|
Servo Spindle |
Max. Spindle Travel |
Inch |
3.94 |
4.72 | ||
|
Spindle Taper |
|
R8/NT30 |
NT40 | |||
|
Max. Speed |
RPM |
6000 |
6000 | |||
|
Continuous Power |
Hp |
5 | ||||
|
Continuous Torque |
In-Lb |
208 | ||||
|
Variable Speed Spindle |
Max. Spindle Travel |
Inch |
3.94 |
4.72 | ||
|
Spindle Taper |
|
R8/NT30 |
NT40 | |||
|
Speed Range |
RPM |
70-4620 |
80-5540 | |||
|
Power |
Hp |
5 | ||||
|
Step Pulley Spindle |
Max. Spindle Travel |
Inch |
3.94 |
4.72 | ||
|
Spindle Taper |
|
R8/NT30 |
NT40 | |||
|
Max. Speed |
RPM |
70-4620 |
80-5540 | |||
|
Power |
Hp |
5 | ||||
|
Precision |
Accuracy |
Inch/12" |
(+/-) 0.0004 | |||
|
Repeatability |
Inch |
(+/-) 0.0002 | ||||
|
Machine |
Dimensions (LxWxH) |
Foot |
6 x 5.25 x 7 |
7 x 6 x 8 |
7 x 6 x 8 |
7 x 6 x 8 |
|
Net Weight |
Lb |
3000 |
3520 |
3740 |
4070 | |
|
Square way and dual square rail linear bearing quill - designed for maximum rigidity Yaskawa Servo Motors/Drives(850W) - XYZ control standard (4th Axis Optional) Pre-loaded double end supported class C5 ball screws laser mapped - superior accuracy Rigid - drilling, tapping, reaming, and boring with inverter motor option Precision hand scraped surfaces - increased contact plane - heavy cutting Turret and ram - extended cutting range or optional fixed head for increased rigidity Column designed with cross-ribbed structure - increase rigidity Double-wall Knee structure/Extended Saddle and Turret - increased rigidity Automatic lubrication System/Telescoping Way Covers - standard Coolant System with Large chip pan and semi-enclosure shield - standard Air Power Draw Bar - standard High/Low voltage cabinets are separated - eliminates interference Pedant design controller box - ease of operation Choices of controllers: GE Fanuc Series 0i Mate or LNC 520 (Stock) 1 Year Warranty - Parts, Labor, Training and Support |
Contact:
Info@millmaxUSA.com
1732 Aviation Blvd #317
Redondo Beach, CA 90278
main (310) 937-4253
fax (310) 943-6594
Imported by Good News Industrial LLC
All Rights Reserved